Tips for maintaining harvester blades
Release time:
2022-05-24
Author:
Source:
Lubrication should be carried out strictly in accordance with the lubrication points, cycle times and oil types specified in the lubrication diagram and table in the combine harvester's manual.
1. Lubrication should be carried out strictly in accordance with the lubrication points, cycle times and oil types specified in the lubrication diagram and table in the combine harvester's manual.
2. Check the connection of each component. If any is loose, tighten it immediately. In particular, it is necessary to inspect the blades of the crushing device, tighten the scraper conveyor, and check whether there is any deformation or damage to the panel.
3. Clean the cutter. After cleaning it thoroughly, apply anti-rust agent on the surface of the cutter to prevent it from rusting.
4. Remove the cutter assembly, clean it, apply anti-rust agent and place it on a level plate or hang it up to prevent deformation.
5. Clean the sprocket and apply anti-rust agent on its surface to prevent rusting. In addition, lubricate all the contact and moving parts of the sprocket.
6. For new or newly repaired combine harvesters, after the trial operation is completed, all the oil in the transmission should be drained, cleaned thoroughly and then new oil should be added. Check the oil level once a week at work and add it immediately if it is insufficient.
Key words:
Latest News
Inquire about product solutions now
If you are interested in our products, please submit your request immediately and we will arrange professional staff to serve you.
Address: No. 03001, Yuyuan Road, Weifang Binhai Economic Development Zone, Shandong Province
Service Hotline
